LEMON Manuals
: Even more car manuals for everyone
Home
›
Mazda
›
2009
›
RX-8 R3, 1.3 2
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 557 (Dynamic Stability Control System)
›
DSC HU/Cm Removal/Installation
›
DSC HU/CM Connector Installation Note
DSC HU/CM Connector Installation Note
WARNING:
This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
After connecting the connector, verify that the lock lever is completely pushed in.
Fig 1: Pushing Lock Lever
Courtesy of MAZDA MOTORS CORP.