LEMON Manuals: Even more car manuals for everyone

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the key interlock solenoid connector.
  4. Inspect for continuity between terminals A and B.
    • If there is no continuity, replace the key cylinder.
  5. Connect the key interlock solenoid connector.
  6. Install the column cover.
  7. Connect the negative battery cable.
    Fig 1: Identifying Key Interlock Solenoid Connector
    G04328809Courtesy of MAZDA MOTORS CORP.