Removal and Installation
- With the vehicle in NEUTRAL, position it on a hoist. See
LIFTING
.
CAUTION:
- Do not allow the steering column shaft to rotate while the intermediate shaft is disconnected or damage to the clockspring can result. If there is evidence that the steering column shaft has rotated, the clockspring must be removed and re-centered. See
CLOCKSPRING
.
- Remove and discard the lower steering column shaft-to-upper steering column shaft bolt.
- Collapse the lower steering column shaft.
- To install, tighten to 55 N-m (5.6 kgf-m, 41 ft-lbf).
- Remove the upper steering column shaft-to-steering column bolt and remove the upper steering column shaft.
- Discard the bolt.
- To install, tighten to 27 N-m (2.8 kgf-m, 20 ft-lbf).
- Remove the lower steering column shaft-to-steering gear bolt and remove the lower steering column shaft.
- Discard the bolt.
- To install, tighten to 55 N-m (5.6 kgf-m, 41 ft-lbf).
- To install, reverse the removal procedure.