LEMON Manuals: Even more car manuals for everyone

Selector Lever Component Inspection

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L3] ).
  2. Disconnect the negative battery cable.
  3. Remove the console. (See CONSOLE REMOVAL/INSTALLATION ).
  4. Disconnect the selector lever component connector.
  5. Verify that the continuity is as indicated in the table.
    • If there is any malfunction, replace the selector lever component. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION ).
      Fig 1: Checking Selector Lever Component Continuity
      G04314585Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Selector Lever Connector Terminal
      G04314586Courtesy of MAZDA MOTORS CORP.