LEMON Manuals: Even more car manuals for everyone

Select Cable Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Make sure that the shift lever (transaxle side) is in neutral.
  2. Push the safety lock, then unlock the lock piece of the select cable in the order shown in the figure.
  3. Shift the sift lever to neutral.
    Fig 1: Pushing Safety Lock
    G04314364Courtesy of MAZDA MOTORS CORP.
  4. Lock the lock piece of the selector cable in the figure.
  5. Shift the shift lever from neutral to other position, and make sure that there are no other components in that area to interfere with the lever.
    Fig 2: Identifying Lock Piece Of Selector Cable
    G04314365Courtesy of MAZDA MOTORS CORP.