DTC P2126
DETECTION CONDITION AND POSSIBLE CAUSE (DTC P2126 - LF, L3)
| DTC P2126 | Accelerator pedal position (APP) sensor No. 2 range/performance problem |
|---|---|
| DETECTION CONDITION |
Diagnostic support note |
| POSSIBLE CAUSE |
|
DIAGNOSTIC PROCEDURE CHART
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | VERIFY FREEZE FRAME DATA HAS BEEN RECORDED
|
Yes | Go to the next step. |
| No | Record the FREEZE FRAME DATA on the repair order, then go to the next step. | ||
| 2 | VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to the available repair information.
|
| No | Go to the next step. | ||
| 3 | INSPECT APP SENSOR NO. 2
|
Yes | Replace the APP sensor, then go to Step 4. (See ACCELERATOR PEDAL REMOVAL/INSTALLATION ). |
| No | Go to the next step. | ||
| 4 | VERIFY TROUBLESHOOTING OF DTC P2126 COMPLETED
|
Yes | Replace the PCM, then go to the next step. (See PCM REMOVAL/INSTALLATION ). |
| No | Go to the next step. | ||
| 5 | VERIFY AFTER REPAIR PROCEDURE
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE ). |
| No | DTC troubleshooting completed. | ||