LEMON Manuals: Even more car manuals for everyone

Cruise Control Switch Inspection [LF, L3]: Notes

  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION .)
  4. Disconnect the audio control switch connector.
  5. Inspect for resistance and continuity between cruise control switch terminals A-B using a tester.
    • If not as specified, replace the cruise control switch. (See AUDIO CONTROL SWITCH REMOVAL/INSTALLATION .)
      TERMINALS RESISTANCE CHART

      Switch condition Resistance (ohm)
      ON/OFF button pressed Continuity
      CANCEL button pressed 118-122
      SET/COAST button pressed 667-693
      RES/ACCEL button pressed 2,156-2,244
      No button pressed No continuity
      Fig 1: Checking Resistance And Continuity Between Cruise Control Switch Terminals A-B
      G04313833Courtesy of MAZDA MOTORS CORP.