LEMON Manuals: Even more car manuals for everyone

Removal Note:

WARNING:
  • The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so could result in pretensioner or air bag deployment and could result in personal injury.
WARNING:
  • To reduce the risk of personal injury, do not use any memory saver devices.
NOTE:
  • If a seat equipped with a seat mounted side air bag and/or a safety belt pretensioner (if equipped) system is being serviced, the supplemental restraint system (SRS) must be depowered. 
NOTE:
  • The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
NOTE:
  • The SRS must be fully operational and free faults before releasing the vehicle to the customer.
NOTE:
  • Driver seat is shown, passenger seat is similar.
  1. Depower the SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove the affected seat. See SEAT BUCKET FRONT REMOVAL/INSTALLATION  .
  3. Remove the affected seat backrest assembly. See SEAT BACKREST FRONT - BUCKET AND 40 PERCENT BENCH REMOVAL/INSTALLATION  .
    Fig 1: Removing Seat Cushion Assembly Bolts
    G01937312Courtesy of MAZDA MOTORS CORP.
  4. Remove the four bolts and remove the seat cushion assembly.