LEMON Manuals: Even more car manuals for everyone

Installation Note:

Fig 1: Installing Two Armrest Bracket Bolts
G01937331Courtesy of MAZDA MOTORS CORP.
  1. Install the armrest and install the two armrest bracket bolts (one shown).
    Fig 2: Installing Armrest Bracket Shrouds
    G01937332Courtesy of MAZDA MOTORS CORP.
  2. Install the armrest bracket shrouds.
    Fig 3: Installing Center Child Safety Seat Tether Anchor Bolts
    G01937333Courtesy of MAZDA MOTORS CORP.
  3. Position the front seat cushion trim cover. Secure the hook and loop fastener.
  4. Install the center child safety seat tether anchor and the bolts.
    Fig 4: Attaching Rear Armrest J-Clip
    G01937334Courtesy of MAZDA MOTORS CORP.
  5. Position the material around the tether anchor and attach the hook and loop strip and attach the rear armrest J-clip.
    Fig 5: Attaching J-Clips
    G01937335Courtesy of MAZDA MOTORS CORP.
  6. Attach the J-clips.
    Fig 6: Installing Safety Belt Buckle Pretensioner Nut
    G01937336Courtesy of MAZDA MOTORS CORP.
  7. Install the safety belt buckle pretensioner and install the nut.
    Fig 7: Installing Safety Belt Buckle Pretensioner Cover Screw
    G01937337Courtesy of MAZDA MOTORS CORP.
  8. Install the safety belt buckle pretensioner cove and install the screw.
    Fig 8: Routing Safety Belt Buckle Pretensioner Wire Harness Through Seat
    G01937338Courtesy of MAZDA MOTORS CORP.
  9. Route the safety belt buckle pretensioner wire harness through the seat and attach the harness clips and the electrical connector to the seat cushion pan.
  10. Install the 60 percent bench seat. See SEAT BACKREST FRONT - 60 PERCENT BENCH REMOVAL/INSTALLATION  .
  11. Repower the SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM .