LEMON Manuals: Even more car manuals for everyone

4x2 Installation

  1. To install, reverse the removal procedure.
    1. Using the special tool, install new seals on the power steering return hose and power steering pressure hose.
      Fig 1: Installing Seals On Power Steering Return Hose
      G01924820Courtesy of MAZDA MOTORS CORP.
    2. If necessary, remove the tie-rod ends.
    3. The dished side of the washer faces downward.
    4. Install a new intermediate shaft pinch bolt.
  2. Fill, purge, and leak check the power steering system.
  3. Check and if necessary, adjust the wheel alignment.