DTC P0105: Manifold Absolute Pressure (Map) Sensor Circuit Malfunction: Condition
DTC is set when input voltage from MAP sensor is less than .16 volt or greater than 4.9 volts with ignition on. Possible causes are:
- MAP sensor malfunction.
- Open or short of Blue wire between terminal No. 3U on Powertrain Control Module (PCM) and terminal "B" on MAP sensor. See Figure and Figure .
- Open or short of Light Green/Red wire between terminal No. 3A on Powertrain Control Module (PCM) and terminal "C" on MAP sensor. See Figure and Figure .
- Open or short of Black/Yellow wire between terminal No. 3AB on Powertrain Control Module (PCM) and terminal "A" on MAP sensor. See Figure and Figure .