Relay Box (Motor Relay Resistance Test)
- Measure resistance between relay box connector terminal "F" (Green/Red wire) and terminal "J" (Blue/Black wire) or terminal "B" (Black wire) and terminal "J" (Blue/Black wire). Resistance should be 50-90 ohms. If resistance is not as specified, replace relay box.
- Ensure continuity does not exist between relay box connector terminal "C" (Blue/Red wire) and terminal "G" (Red/Yellow wire). If continuity exists, replace relay box. If continuity does not exist, go to next step.
- Using a 12-volt power source, connect positive lead of 12-volt power source to relay box connector terminal "H" (Blue/Yellow wire) and negative lead to terminal "J" (Blue/Black wire). Check for continuity between relay box connector terminal "C" (Blue/Red wire) and terminal "G" (Red/Yellow wire). If continuity does not exist, replace relay box.