LEMON Manuals: Even more car manuals for everyone

Injector Fuel Leakage

  1. Remove dynamic chamber, if necessary. Loosen delivery pipe attaching bolts. Remove delivery pipe. Using wire, secure injectors tightly onto delivery pipe.
    CAUTION: Ensure injectors are securely tied to delivery pipe. If not properly secured, fuel may spray from loose connections.
  2. Install jumper wire between 2 terminals of fuel pump test circuit connector. See BASIC TESTING - 4-CYL for test connector location. Turn ignition on. Check that no fuel leakage exists at injectors. After 5 minutes, only a slight amount of fuel leakage is acceptable.
NOTE: Injector delivery volume information is not available for B2600i and MPV with 2.6L engine.