LEMON Manuals: Even more car manuals for everyone

Powertrain/Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2022 Lincoln Corsair. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Adjustment 

  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the fasteners and the undershield.
    GFD612045Courtesy of FORD MOTOR COMPANY
  3. Remove the nuts and the bracket.
    GFD612046Courtesy of FORD MOTOR COMPANY
  4. Loosen, but do not remove the roll restrictor fasteners. Verify that the roll restrictor is loose.
    GFD612047Courtesy of FORD MOTOR COMPANY
    • Detach the coolant hose retainer.

    • Remove the bolts and the degas bottle support bracket.

    GFD612048Courtesy of FORD MOTOR COMPANY
  5. Release the tabs and position the degas bottle aside.
    GFD612049Courtesy of FORD MOTOR COMPANY
  6. Loosen, but do not remove the engine mount bolts.
    GFD612050Courtesy of FORD MOTOR COMPANY
  7. Loosen, but do not remove the transmission mount bolts.
    GFD612051Courtesy of FORD MOTOR COMPANY
  8. NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

    Start the vehicle and move it forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft).

    GFD612052Courtesy of FORD MOTOR COMPANY
  9. NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

    Move the vehicle in reverse the same distance 0.6 m (1.97 ft) - 1.2 m (3.94 ft).

    GFD612053Courtesy of FORD MOTOR COMPANY
  10. Tighten the transmission mount bolts.

    Torque:

    Stage 1: 103 lb.ft (140 Nm)

    Stage 2: 120°

    GFD612051Courtesy of FORD MOTOR COMPANY
  11. Tighten the engine mount bolts.

    Torque:

    129 lb.ft (175 Nm)

    GFD612050Courtesy of FORD MOTOR COMPANY
  12. Position the degas bottle on the tabs.
    GFD612049Courtesy of FORD MOTOR COMPANY
    • Install the degas bottle support bracket and the bolts.

    • Attach the coolant hose retainer.

    GFD612048Courtesy of FORD MOTOR COMPANY
    • Tighten the bolts and studbolt.

      Torque:

      81 lb.ft (110 Nm)

    • Tighten the bolt.

      Torque:

      129 lb.ft (175 Nm)

    GFD612054Courtesy of FORD MOTOR COMPANY
  13. Install the bracket and the nuts.

    Torque:

    35 lb.ft (47 Nm)

    GFD612046Courtesy of FORD MOTOR COMPANY
  14. Install the undershield and fasteners.
    GFD612045Courtesy of FORD MOTOR COMPANY
  15. Test the system for normal operation.