LEMON Manuals: Even more car manuals for everyone

Removal and Installation

    CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage can result.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the anti-lock brake system (ABS) module electrical connector.
    Fig 1: Disconnecting Anti-Lock Brake System (ABS) Module Electrical Connector
    G02781396Courtesy of FORD MOTOR CO.
  3. Disconnect the brake tubes from the hydraulic control unit (HCU).
    Fig 2: Disconnecting Brake Tubes From Hydraulic Control Unit (HCU)
    G02781397Courtesy of FORD MOTOR CO.
  4. Remove the bolts and remove the HCU/ECU assembly.
    Fig 3: Removing Bolts And HCU/ECU Assembly
    G02781398Courtesy of FORD MOTOR CO.
  5. Disconnect the ECU from the HCU.
  6. To install, reverse the removal procedure.