LEMON Manuals: Even more car manuals for everyone

Special Tool(s)

Fig 1: Special Tool(s)
G01335848Courtesy of FORD MOTOR CO.
  1. Position the vehicle on a hoist. Place in NEUTRAL. For additional information, refer to JACKING & HOISTING .
  2. Loosen the digital TR sensor bolts.
    Fig 2: Locating TR Sensor Bolts
    G01335849Courtesy of FORD MOTOR CO.
  3. NOTE: Make sure that the manual lever is in the NEUTRAL position.
    Fig 3: Installing TR Sensor Alignment Gauge
    G01335850Courtesy of FORD MOTOR CO.
  4. Using the special tool, align the digital TR sensor slots. The tool is designed to fit snugly.
  5. Tighten the digital TR sensor bolts and remove the special tool.
    Fig 4: Tightening TR Sensor Bolts
    G01335851Courtesy of FORD MOTOR CO.
  6. Lower the vehicle.
  7. Verify that the vehicle starts in the PARK and NEUTRAL positions and the REVERSE lamps illuminate in REVERSE.