LEMON Manuals: Even more car manuals for everyone

Power Steering Pump Pulley: Installation

    CAUTION: Install a new power steering pump pulley after being removed and installed two times.
    Fig 1: Installing Power Steering Pump Pulley
    G03441948Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the power steering pump pulley.
    • Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, install a new pulley. If there is no paint mark or one paint mark, use a paint pencil to mark the web area of the pulley near the hub.
  2. Install the skid plate, if equipped.
    1. Position the skid plate into place.
    2. Install the bolts.
    Fig 2: Installing Skid Plate & Bolts
    G03441949Courtesy of FORD MOTOR CO.
  3. Lower the vehicle.
  4. Rotate the belt tensioner, then install the belt on the power steering pump pulley.
    Fig 3: Rotating Belt Tensioner
    G03441950Courtesy of FORD MOTOR CO.