Extension Housing Gasket: Removal
- Raise and support the vehicle.
- Remove the exhaust.
- Remove the driveshaft. For additional information, refer to REMOVAL (LS) .
- Support the transmission with a transmission jack.
- Remove the bolt.
- Remove the bolts.
- Disconnect the shift cable.
- Remove the nut and discard.
- Using the special tool, remove the output flange.
- Remove the extension housing.
- Remove and discard the extension housing gasket.
CAUTION:
The parking pawl, parking pawl return spring and parking pawl shaft could fall out during removal of the extension housing.