LEMON Manuals: Even more car manuals for everyone

Overdrive Planetary & One-Way Clutch Assembly: Disassembly

    NOTE: The overdrive one-way clutch is serviced with the center shaft assembly.
    Fig 1: Identifying Overdrive Center Shaft Retaining Ring & Center Shaft
    G02143768
  1. Remove the center shaft from the overdrive ring gear.
    1. Remove the overdrive center shaft retaining ring.
    2. While rotating counterclockwise remove the center shaft from the ring gear.
  2. CAUTION: Do not remove the overdrive one-way clutch. Damage to the clutch may occur if it is removed.
    Fig 2: Identifying Overdrive One-Way Clutch & Center Shaft
    G02143769
  3. Clean and inspect the overdrive one-way clutch and center shaft.
    • Inspect for cracks in the roller cage and wear on the roller clutch, and the press fit of the one-way clutch to the center shaft.
  4. Inspect the one-way clutch.
    • Temporarily insert the overdrive planetary gear carrier assembly into the one-way clutch rollers for verification of the one-way clutch.
    • The planetary gear must rotate counterclockwise and hold when rotated clockwise.
    • Remove the planetary gear carrier assembly.
    Fig 3: Identifying One-Way Clutch
    G02143770