Measuring Riding Height
- Vehicle must pass Auto Test procedure twice before performing riding height measurement and adjustment procedure. See ADJUSTMENTS in SUSPENSION - ELECTRONIC AIR SYSTEM article. Codes 11, 29 and/or 45 are accepted as pass codes.
- Ensure suspension switch, located on left panel of trunk, is in OFF position. Measure vertical distance from bottom edge of wheel to wheelwell lip. See RIDING HEIGHT SPECIFICATIONS table.
RIDING HEIGHT SPECIFICATIONS
| Application | Preferred: In. (mm) | Range: In. (mm) |
|---|---|---|
| Front | 24.25 (616) | 24.25-24.75 (616-629) |
| Rear | 24.25 (616) | 24.0-24.5 (616-622) |