LEMON Manuals: Even more car manuals for everyone

Registration [12/2021 - ]: Procedure

  1. A/T CODE REGISTRATION 
    NOTE:

    When the TCM is replaced, perform "A/T Code Registration".

    1. Perform A/T Code Registration (Read Compensation Code) and A/T Code Registration (Set Compensation Code)

      HINT: 

      When the TCM (when the transmission compensation code can be read) is replaced, perform A/T Code Registration (Read Compensation Code) before replacement.

      After the TCM is replaced, perform A/T Code Registration (Set Compensation Code) and perform drive learning.

      1. Make sure the shift lever is in P or N.
      2. Connect the GTS to the DLC3.
      3. Turn the ignition switch to ON.
        NOTE:

        Do not start the engine.

      4. Turn the GTS on.
      5. Enter the following menus: Powertrain / Transmission / Utility / A/T Code Registration.

        Powertrain > Transmission > Utility 

        Tester Display
        A/T Code Registration
      6. Select "Read Compensation Code".
      7. Perform A/T Code Registration (Read Compensation Code) according to the screen display.
        NOTE:

        If the compensation code cannot be read, perform drive learning after A/T Code Registration (Fixed Code).

      8. Turn the ignition switch off.
      9. Replace the TCM.
      10. Turn the ignition switch to ON.
        NOTE:

        Do not start the engine.

      11. Turn the GTS on.
      12. Enter the following menus: Powertrain / Transmission / Utility / A/T Code Registration.

        Powertrain > Transmission > Utility 

        Tester Display
        A/T Code Registration
      13. Select "Set Compensation Code".
      14. Perform A/T Code Registration (Set Compensation Code) according to the screen display.
  2. A/T CODE REGISTRATION (FIXED CODE) 
    NOTE:

    When the TCM is replaced, perform "A/T Code Registration".

    1. Perform A/T Code Registration (Fixed Code)

      HINT: 

      When the TCM (when the transmission compensation code cannot be read) is replaced, perform A/T Code Registration (Fixed Code) after replacement, and then perform drive learning.

      1. Make sure the shift lever is in P or N.
      2. Connect the GTS to the DLC3.
      3. Turn the ignition switch to ON.
        NOTE:

        Do not start the engine.

      4. Turn the GTS on.
      5. Enter the following menus: Powertrain / Transmission / Utility / A/T Code Registration (Fixed Code).

        Powertrain > Transmission > Utility 

        Tester Display
        A/T Code Registration (Fixed Code)
      6. Perform A/T Code Registration (Fixed Code) according to the screen display.