Installation [08/2015 - ]: Procedure
- INSTALL TRANSMISSION VALVE BODY ASSEMBLY
- Install the spring and check ball body.TEXT IN ILLUSTRATION
*1 Spring *2 Check Ball Body - Insert the pin of the manual valve into the hole of the manual valve lever.TEXT IN ILLUSTRATION
*1 Pin - Install the transmission valve body with the 19 bolts.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
HINT:
Each bolt length is indicated below.
36 mm (1.42 in.) for bolt A
25 mm (0.984 in.) for bolt B
45 mm (1.77 in.) for bolt C
50 mm (1.97 in.) for bolt D
- Install the detent spring and detent spring cover with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Install the spring and check ball body.
- CONNECT TRANSMISSION WIRE
See step 2
- INSTALL VALVE BODY OIL STRAINER ASSEMBLY
See step 3
- INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
See step 4
- ADD AUTOMATIC TRANSMISSION FLUID
- Add automatic transmission fluid (Refer to ADJUSTMENT [08/2015 - 08/2019] , or refer to ADJUSTMENT [08/2019 - 08/2020] , or refer to ADJUSTMENT [08/2020 - ] ).
- RESET MEMORY
- Perform the Reset Memory procedures (A/T initialization) (Refer to INITIALIZATION [08/2015 - ] ).