Installation [08/2015 - ]: Procedure
- INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET
- Install the console box mounting bracket with the 2 screws.
- INSTALL SHIFT LEVER ASSEMBLY
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Install the transmission floor shift with the 4 bolts and tighten the bolts in the order shown in the illustration.
Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
- Connect the 2 connectors and attach the 4 wire harness clamps.
- Install the transmission floor shift with the 4 bolts and tighten the bolts in the order shown in the illustration.
- CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
- Turn the socket of the transmission control cable 180° counterclockwise. While holding the socket in place, push in the lock piece until the lock piece clicks twice.NOTE:
Do not over-rotate the socket as it will come off the internal spring and the transmission control cable will not be reusable.
TEXT IN ILLUSTRATION*1 Socket *2 Lock Piece *a Push in - - HINT:
If the lock piece cannot be pushed in, slightly turn the socket clockwise and then push in the lock piece again.
- Install the outer part of the transmission control cable to the shift lever retainer. Check that the socket and lock piece are in their original positions.TEXT IN ILLUSTRATION
*1 Shift Lever Retainer - - - Slide the slider in the direction shown in the illustration and pull out the lock piece.TEXT IN ILLUSTRATION
*1 Slider *2 Lock Piece - Connect the end of the cable to the shift lever.NOTE:
- Make sure that the lock piece is pulled out.
- Push the end of the cable all the way to the base of the pin.
- Push the lock piece into the adjuster case and lock it.NOTE:
Make sure that the lock piece is completely locked by the slider.
- Turn the socket of the transmission control cable 180° counterclockwise. While holding the socket in place, push in the lock piece until the lock piece clicks twice.
- INSPECT SHIFT LEVER POSITION
See step 1
- INSTALL NO. 1 CONSOLE BOX DUCT
- Install the console box duct with the clip.
- INSTALL REAR CONSOLE BOX ASSEMBLY
- Install the rear console box (Refer to INSTALLATION [08/2015 - 08/2019] , or refer to INSTALLATION [08/2019 - 08/2021] , or refer to INSTALLATION [08/2021 - ] ).
- w/ Refrigerated Cool Box:
Install the rear console box (Refer to INSTALLATION [08/2015 - 08/2020] , or refer to INSTALLATION [08/2020 - 08/2021] , or refer to INSTALLATION [08/2021 - ] ).