Installation [09/2014 - 10/2015]: Procedure
- INSTALL FUEL RELIEF VALVE ASSEMBLY
- Install a new gasket to the fuel relief valve assembly.
- Using a 17 mm union nut wrench, install the fuel relief valve assembly to the No. 2 fuel delivery pipe.
Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf)
NOTE:- Do not apply oil to the threads of the fuel relief valve assembly and No. 2 fuel delivery pipe.
- Do not allow foreign matter to enter the pipe during installation.
- Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench (Refer to PRECAUTION [09/2014 - 10/2015] ).
- INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY
See step 4
- INSTALL INTAKE MANIFOLD
(Refer to INSTALLATION [09/2014 - 10/2015] )