Disassembly [09/2014 - 10/2015]: Procedure
- REMOVE FUEL SENDER GAUGE ASSEMBLY
See step 2
- REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY NOTE:
- Do not disconnect the hose indicated in the illustration.
- When replacing the fuel filter assembly, replace it together with the fuel suction plate sub-assembly.
- REMOVE FUEL FILTER ASSEMBLY
- REMOVE JET PUMP
- Using a screwdriver with the tip taped, disengage the claw and remove the jet pump nozzle.TEXT IN ILLUSTRATION
*1 Protective Tape - Using a clip remover with the tip taped, remove the jet pump from the No. 1 fuel sub-tank.TEXT IN ILLUSTRATION
*1 Protective Tape Remove the O-ring from the jet pump.
TEXT IN ILLUSTRATION*1 Jet Pump *2 O-Ring
- Using a screwdriver with the tip taped, disengage the claw and remove the jet pump nozzle.
- REMOVE FUEL PUMP HARNESS
- REMOVE NO. 1 FUEL SUCTION SUPPORT
- REMOVE FUEL WITH FILTER PUMP ASSEMBLY
- REMOVE FUEL MAIN VALVE ASSEMBLY
- REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
See step 2