LEMON Manuals: Even more car manuals for everyone

Inspection [09/2014 - 10/2015]: Procedure

  1. INSPECT FUEL INJECTOR ASSEMBLY 
    NOTE:

    This inspection aims at inspecting the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are a high-pressure type and cannot be inspected for fuel injection volume.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.01 to 2.31 Ω

      If the result is not as specified, replace the fuel injector assembly.