System Outline
This system provides the steering wheel with automatic tilt and telescopic mechanisms using a motor drive, and also provides tilt and telescopic ECU control, allowing the steering position to be altered in the back and forth, and vertical directions. This makes it possible to set the steering to the desired steering position, and move the steering to a position where the driver can easily get in and out of the vehicle, allowing easier seating. Additionally, by linking with the power seat and remote control mirror, the optimal driving position corresponding to the driver's individual needs can be stored into the memory.
- Auto Return Operation
When the ignition key is inserted into the key cylinder, a signal is input to the tilt and telescopic ECU. This activates the tilt and telescopic ECU and it automatically returns the steering wheel to the position set before the ignition key was removed
- Auto Away Operation
When the ignition key is turned from on to off and then removed from the key cylinder, a signal is input to the tilt and telescopic ECU through communication control of the body ECU etc. This activates the tilt and telescopic ECU and it automatically moves the steering wheel to the top tilt step position and maximum telescopic retract position.
- Driving Position Memory Function
The pulse signals detected by the tilt and telescopic sensors are input to the tilt and telescopic ECU. This makes it possible to store and recall the desired driving position through communication control of the body ECU.