LEMON Manuals: Even more car manuals for everyone

Window Defogger Wire: Repair: Repair

  1. REPAIR DEFOGGER WIRE 
    Fig 1: Placing Masking Tape Along Both Sides Of Wire
    GTY120624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Clean the broken wire tips with grease, wax and silicone remover.
    2. Place masking tape along both sides of the wire.
    3. Thoroughly mix the repair agent.

      DuPont paste

      No. 4817 or equivalent

    4. Fig 2: Applying Small Amount Of Agent To Wire
      GTY120625Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Using a fine tip brush, apply a small amount of the agent to the wire.
    6. After a few minutes, remove the masking tape.
      NOTE:

      Do not allow electricity to flow in the defogger wire for at least 24 hours.