On-Vehicle Inspection
- INSPECT FRONT STEREO COMPONENT SPEAKER (w/ Front Center Speaker)
HINT.
Remove interior parts so that the front stereo component speaker can be seen
- Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the front stereo component speaker.
- Visually check the speaker.
OK: The cone paper of the speaker is not torn.
If the result is not as specified, replace the front stereo component speaker
- Speaker resistance check
- Disconnect the front stereo component speaker connector.
- Measure the resistance according to the value(s) in the table below
Standard Resistance
RESISTANCE SPECIFICATIONTester Connection Condition Specified Condition 1-2 Always 7 to 9 Ω If the result is not as specified, replace the front stereo component speaker
- Check the speaker installation.