Inspection Procedure
HINT
After the inspection is completed, clear the DTCs
- CHECK DISC
- Check that the disc is not deformed or cracked.
OK: No deformation or cracks on the disc.
NG: CHANGE DISC
OK: Go to next step
- Check that the disc is not deformed or cracked.
- DISC CLEANING
- Disc cleaning
- If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial directionNOTE: Do not use conventional record cleaner or antistatic preservative.
- If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction
- Disc cleaning
- CLEAR DTC
- Clear the DTCs (See DTC CHECK / CLEAR )
- RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: Go to step 5
OK: END
- Recheck for DTCs and check if the same trouble occurs again.
- REPLACE DISC WITH ANOTHER AND RECHECK
- Replace the disc with another and recheck.
- Replace the disc with another known good one.
- Clear the DTCs (See DTC CHECK / CLEAR ).
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: REPLACE RADIO RECEIVER (See REMOVAL )
OK: END
- Replace the disc with another and recheck.