LEMON Manuals: Even more car manuals for everyone

Window Glass Antenna Wire: Repair

  1. INSPECT WINDOW GLASS ANTENNA WIRE 
    NOTE: When cleaning the glass, use a soft, dry cloth, and wipe the glass in the direction of the wire. Take care not to damage the wires. Do not use detergents or glass cleaners with abrasive ingredients. When measuring voltage, wind a piece of tin foil around the top of the negative probe and press the foil against the wire with your finger, as shown in the illustration.
    Fig 1: Checking Voltage Between Wire
    G04954149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check the voltage at the center of each wire, as shown in the illustration.
      Fig 2: Identifying Voltage At Center Of Each Wire
      G04954150Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REPAIR WINDOW GLASS ANTENNA WIRE 
    1. Clean the broken wire tips with the grease, wax and silicone remover.
    2. Fig 3: Identifying Broken Wire Tips
      G04954151Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Place the masking tape along both sides of the wire to be repaired.
    4. Thoroughly mix the repair agent (DuPont paste No. 4817).
    5. Using a fine tip brush, apply a small amount of the repair agent to the wire.
    6. Fig 4: Identifying Amount Of Repair Agent To Wire
      G04954152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. After a few minutes, remove the masking tape.
    8. Do not repair the antenna wire for at least 24 hours.