VIDEO TERMINAL (for Standard): Installation
- INSTALL VIDEO TERMINAL
- Attach the 4 claws to install the video terminal.
- INSTALL CONSOLE BOX POCKET LOWER
- Attach the 8 claws to install the console box pocket lower.
- Connect the connector.
- INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER (See INSTALLATION )
- INSTALL REAR CONSOLE PANEL UPPER (See INSTALLATION )
- INSTALL NO. 3 BOX PANEL (See INSTALLATION )
- INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )
- INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
- INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).