Front Door Speaker: Removal
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
- REMOVE COWL TOP VENTILATOR LOUVER RH (See REMOVAL )
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- REMOVE DOOR INSIDE HANDLE BEZEL (See REMOVAL )
- REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (See REMOVAL )
- REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (See REMOVAL )
- REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
- Disconnect the speaker connector.
- Remove the 4 screws and speaker.NOTE: Do not touch the cone part of the speaker.