Inspection Procedure
- CHECK PANEL SWITCH
- Check for foreign matter around the switch that might prevent operation.
OK :
No foreign matter is found.
NG: REMOVE ANY FOREIGN MATTER FOUND
OK: GO TO NEXT STEP
- Check for foreign matter around the switch that might prevent operation.
- CHECK PANEL SWITCH (DISPLAY CHECK MODE)
- Enter the "Display Check" mode (Panel Switch Check Mode) (see DISPLAY CHECK MODE ).
- Operate the abnormal switch and check if the switch name and status are correctly displayed.
OK :
The switch name and status are correctly displayed as operated.
NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
OK: REPLACE MULTI-DISPLAY (See REMOVAL )