LEMON Manuals: Even more car manuals for everyone

Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

  1. CHECK DISC 
    1. Check that the disc is not deformed or cracked.

      OK : 

      No deformation or cracks on the disc. 

      Fig 1: Identifying Disc In Deformed Or Cracked Condition
      G04948904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    NG: REPLACE DISC 

    OK: GO TO NEXT STEP 

  2. DISC CLEANING 
    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
      NOTE: Do not use a conventional record cleaner or antistatic preservative.
      Fig 2: Cleaning Disc With Soft Cloth
      G04833494Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CLEAR DTC 
    1. Clear the DTC (see DTC CHECK / CLEAR  ).
  4. RECHECK DTC 
    1. Recheck DTCs and check if the same trouble occurs again.

      OK : 

      Malfunction disappears. 

    NG: Go to step 5 

    OK: END 

  5. REPLACE DISC WITH ANOTHER AND RECHECK 
    1. Replace the disc with a normal one.
    2. Clear the DTCs (see DTC CHECK / CLEAR  ).
    3. Recheck for DTCs and check if the same trouble occurs again.

      OK : 

      Malfunction disappears. 

    NG: REPLACE DISC PLAYER (See  DISC PLAYER (FOR OTTOMAN)   ) 

    OK: END