IG1 Relay Freezing (L-SB-0057-09)
Publication date: 2009-05-13Reference number: L-SB-0057-09
IG1 RELAY FREEZING
TECHNICAL SERVICE BULLETIN
| LEXUS: | 2007-09 ES350, RX350; 2006 RX330; 2006-08 RX400H |
| Section: | Networking |
| Service Category: | Power Source/Network |
| COPYRIGHT: | © 2018 Lexus, a division of Toyota Motor Sales, USA License Agreement TMS1002 |
Applicability
| YEAR(S) | MODEL(S) | ADDITIONAL INFORMATION |
|---|---|---|
| 2007 - 2009 | ES350, RX350 | |
| 2006 | RX330 | |
| 2006 - 2008 | RX400H |
Introduction
Some customers may experience multiple warning lights illuminated, vehicle not shifting from park to drive, and other accessories becoming inoperative after the vehicle has cold soaked in sub-freezing (below 14°F [-10°C]) ambient air temperatures. A new relay and wire harness has been made available to improve this condition. Use the following procedure to address this concern.
Parts Information
| PREVIOUS PART NUMBER | CURRENT PART NUMBER | PART NAME | QTY |
|---|---|---|---|
| 90987-02025 90080-87024 (Color: Gray) |
90987-02032 | F/Fix Kit (includes IG1 Relay, sub-wire, and wire ties) | 1 |
| 90987-02030 90987-A2002 (Color: Pink) |
Warranty Information
| OP CODE | DESCRIPTION | TIME | OFP | T1 | T2 |
|---|---|---|---|---|---|
| EL8065 | Relay Replacement | 0.9 | 90987-020## | 72 | 02 |
APPLICABLE WARRANTY
- This repair is covered under the Lexus Comprehensive Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle's in-service date.
- Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Required Tools & Equipment
| SPECIAL SERVICE TOOLS (SST'S) | PART NUMBER | QTY | ||
|---|---|---|---|---|
| Plastic Pry Tool Set(1) | 00002-06000-01 | 1 | ||
|
||||
| REQUIRED EQUIPMENT | SUPPLIER | PART NUMBER | QTY | ||
|---|---|---|---|---|---|
| TIS Techstream(1)
NOTE:
Software version 4.11.000 or later is required.
|
ADE | TSPKG1 | 1 | ||
|
|||||
Repair Procedure
- Remove the knee airbag.
Refer to the Technical Information System (TIS), applicable model and model year Repair Manual:
- 2006
RX330:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Removal"
- 2007
/2008
/2009
RX350:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Removal"
- 2007
/2008
/2009
ES350:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Removal"
- 2006
/2007
/2008
RX400H:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Removal"
- 2006
RX330:
- Remove the IG1 Relay from the Junction Block.
- Install the new IG1 Relay.
- Install the new IG1 relay to the end of the sub-harness.
- Install the other end of the harness to the Junction Block.
- Route the harness according to the correct figure.NOTE: Do NOT attach the wire tie to an unprotected wire.
- Using wire ties, secure the harness and the relay.
- Reinstall the knee airbag.
Refer to TIS, applicable model and model year Repair Manual:
- 2006
RX330:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Installation"
- 2007
/2008
/2009
RX350:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Installation"
- 2007
/2008
/2009
ES350:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Installation"
- 2006
/2007
/2008
RX400H:
Vehicle Interior - Supplemental Restraint Systems: "Driver Side Knee Airbag Assembly: Installation"
- 2006
RX330:
- Connect TIS Techstream and clear any stored DTCs.
- Initialize power systems (windows, moonroof, etc.). Refer to appropriate service bulletin.