LEMON Manuals: Even more car manuals for everyone

HVAC Control Panel Peeling (Heater Control Housing Sub-Assembly) (BO002-04)

Publication date: 2004-02-05
Reference number: BO002-04

HVAC CONTROL PANEL PEELING (HEATER CONTROL HOUSING SUB-ASSEMBLY)

HVAC CONTROL PANEL PEELING (HEATER CONTROL HOUSING SUB-ASSEMBLY)

TECHNICAL SERVICE BULLETIN

Reference Number(s): BO002-04, Date of Issue:  February 5, 2004
LEXUS: 2001 - 2003 IS 300
SECTION: BODY
COPYRIGHT: © 2018 Lexus, a division of Toyota Motor Sales, USA License Agreement TMS1002

INTRODUCTION

Some HVAC control panels on 2001 - 2003 model year IS 300 vehicles may experience peeling on the surface. The part has been improved to correct this condition.

APPLICABLE VEHICLES

2001 - 2003  model year IS 300  vehicles produced BEFORE  the Production Change Effective VIN shown below.

PRODUCTION CHANGE INFORMATION

PRODUCTION CHANGE INFORMATION

Model Production Change Effective VIN
IS 300 JTHBD192240081133

WARRANTY INFORMATION

WARRANTY INFORMATION

OP Code Description Time OFP T1 T2
883851 R & R Heater Control Housing Assembly 0.4 55904-530## 99 15
Combo A R & R Heater Control Housing Panel Sub-assembly 0.1 55904-530## 99 15
NOTE: Applicable Warranty*
This repair is covered under the Lexus Comprehensive Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

PARTS INFORMATION

PARTS INFORMATION

Previous Part Number Current Part Number Part Name Qty
55904-53040, 55904-53041, 55904-53080 55904-53080 Housing Sub-assembly, Heater Control 1
NOTE: Please inspect the packing date printed on the part number label as shown below. Parts with dates 3H20 (August 20, 2003) and after are the new parts.
Fig 1: Packing Date Label
G02538830Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REPAIR PROCEDURE

  1. Remove Center Cluster Finish Panel 
    NOTE: Tape the screwdriver tip before use.
    1. Using a screwdriver, remove center register opening cover.
    2. Remove the 2 screws.
    3. Using a screwdriver, remove center cluster finish panel.
      Fig 2: Removing Center Cluster Finish Panel
      G02538831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. With LEXUS Navigation System: Disconnect the connectors.
  2. Remove Lower Center Cluster Finish Panel 
    1. Using a screwdriver, remove the lower center cluster finish panel.
      Fig 3: Removing Lower Center Cluster Finish Panel
      G02538832Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connectors.
  3. Remove A/C Control Assembly 
    1. Remove the 4 bolts and pull out the A/C control assembly with radio assembly, then disconnect the connectors.
      Fig 4: Removing A/C Control Assembly
      G02538833Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 12 screws and 2 brackets.
    3. Separate the A/C control assembly and radio assembly.
    Fig 5: Separating A/C Control Assembly & Radio Assembly
    G02538834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. Remove A/C Amplifier 
    1. Remove the 4 screws.
      Fig 6: Removing A/C Amplifier
      G02538835Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver, release the 4 claws and remove the heater control housing sub-assembly.
    Fig 7: Locating Heater Control Housing Sub-Assembly
    G02538836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. Replace Cover and Reinstall 
    1. Install new heater control housing sub-assembly.
    2. Reinstall all components in the reverse order of removal.