Accessory Cut Relay (2003-04)
WARNING: This page is about a different car, the 2004 Lexus LX 470, 2003 Lexus LX 470, and 2002 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
- Locate and remove accessory cut relay. See Fig 1.
- Using an ohmmeter, check that there is continuity across terminals 1 and 2. See Fig 2, Continuity Test. Continuity should not exist across terminals 3 and 5. Check that there is continuity between terminals 3 and 4. If the relay does not operate as specified, replace relay.
- Apply battery voltage across terminals 1 and 2. Using an ohmmeter, check that there is no continuity between terminals 3 and 4. See Fig 2, Operation Test. Using ohmmeter, check that there is continuity between terminals 3 and 5. If the relay does not operate as specified, replace relay.
- If relay operates as specified, reinstall relay.