LEMON Manuals: Even more car manuals for everyone

Test No. 15: Instrument Cluster Communication Bus Shorted: Testing

  1. Disconnect 28-pin E5 connector (GS300) or 35-pin E7 connector (GS430) from ECM. See Figure andFigure. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, replace ECM.
  2. Connect ECM connector. Disconnect 22-pin connector A13 from A/C ECU. See Figure. Disconnect gateway ECU 14-pin G6 connector. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 or B1267 are not present, replace gateway ECU.
  3. If not equipped with steering pad switch, go to next step. If equipped with steering pad switch, disconnect gateway ECU 14-pin G6 connector. Disconnect steering pad switch Black 6-pin connector. Recheck for DTCs. If B1266 or B1267 are present, reconnect connectors and go to next step. If B1266 and B1267 are not present, replace steering pad switch.
  4. Disconnect 10-pin Gray connector T5 from tilt/telescopic ECU. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, replace tilt/telescopic ECU.
  5. Connect 10-pin Gray connector T5 to tilt/telescopic ECU. Disconnect air bag 28-pin connector. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, replace air bag sensor assembly.
  6. Connect air bag 28-pin connector. Disconnect instrument cluster 18-pin connector C13. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, replace instrument cluster ECU.
  7. Connect instrument cluster ECU connector. Disconnect 25-pin connector B6 from body ECU No. 2. Remove body No. 2 ECU from driver-side junction block. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, replace body No. 2 ECU.
  8. Disconnect instrument cluster ECU 22-pin connector C12. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between instrument cluster ECU and body ECU No. 2.
  9. Connect body ECU No. 2 to driver-side junction block. Connect 25-pin body ECU No. 2 connector. Disconnect 28-pin air bag sensor connector. Recheck for DTCs. If B1266 and B1267 are not present, repair wiring harness between instrument cluster ECU and air bag sensor assembly. If B1266 and B1267 are present, go to next step.
  10. Disconnect tilt/telescopic ECU Gray 20-pin connector T5. Recheck for DTCs. If B1266 and B1267 are not present, repair wiring harness between air bag sensor assembly and tilt/telescopic ECU. If B1266 or B1267 are present, reconnect Gray 10-pin connector T5 to tilt/telescopic ECU. Go to next step.
  11. Connect 28-pin air bag sensor connector. Disconnect gateway ECU 14-pin connector. Recheck for DTCs. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between tilt/telescopic ECU and gateway ECU.
  12. Connect gateway ECU connector. Disconnect steering pad switch 6-pin connector. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between steering pad switch and tilt/telescopic ECU.
  13. Connect steering pad switch 6-pin connector. Disconnect A/C ECU 22-pin connector. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between A/C ECU and tilt/telescopic ECU.
  14. Connect tilt/telescopic ECU connector. Disconnect gateway ECU 14-pin connector. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between gateway ECU and A/C ECU.
  15. Connect A/C ECU 22-pin connector. Disconnect steering pad switch 6-pin connector. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between gateway ECU and steering pad switch.
  16. Connect gateway ECU 14-pin connector. Disconnect A/C ECU 22-pin connector. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between steering pad switch and A/C ECU.
  17. Connect steering pad switch 6-pin connector. Disconnect ECM 28-pin (GS300) or 35-pin (GS430) connector. If B1266 or B1267 are present, go to next step. If B1266 and B1267 are not present, repair wiring harness between A/C ECU and ECM.
  18. Connect A/C ECU 22-pin connector. Disconnect body ECU 25-pin connector. Check continuity of White wire between body ECU No. 1, terminal No. 19 and ECM connector terminal No. 28 (GS300) or terminal No. 21 (GS430).