LEMON Manuals: Even more car manuals for everyone

Camshaft Position Sensor

Remove engine cover. Locate Camshaft Position (CMP) sensor. See CAMSHAFT POSITION SENSOR LOCATION  table. Remove intake air connector pipe, if necessary. Disconnect CMP sensor 2-pin connector. Measure resistance between CMP sensor terminals. Replace CMP sensor if resistance is not as specified. See CAMSHAFT POSITION SENSOR RESISTANCE  table.

CAMSHAFT POSITION SENSOR LOCATION

Application Location
GS300 & IS300 Left Rear Intake Side Of Cylinder Head
GS430 & LS430 Mounted To Front Of Left Upper (No. 3) Timing Belt Cover
CAMSHAFT POSITION SENSOR RESISTANCE

Temperature °F (°C) Ohms
-14-122 (-10-50) 835-1400
123-212 (51-100) 1060-1645