Test No. 19 - Power Seat Ecu Communication Problem: Testing
- Check operation of front and rear vertical seat motors. If operation is okay, go to next step. If seat front and back vertical do not operate, replace power seat ECU.
- Disconnect 25-pin connector R12 from left rear door ECU. Disconnect 22-pin connector P19 from power seat ECU. Disconnect 25-pin connector R13 from right rear door ECU. Check continuity of Blue/Orange wire between left rear door ECU connector R12 terminal No. 4 and power seat ECU connector P19 terminal No. 10. See Figure and Figure. Check continuity of Orange wire, through connector Blue/Yellow wire, through connector and Blue/Orange wire between power seat ECU connector P19 terminal No. 11 and right rear door ECU connector R13 terminal No. 5. See WIRING DIAGRAMS.
- If continuity exists on both wires, replace power seat ECU. If continuity does not exist or one or both wires, repair wiring as necessary.