LEMON Manuals: Even more car manuals for everyone

Power Rack & Pinion: Disassembly

  1. Using Rack Housing Stand (09612-00012 ), clamp rack and pinion assembly in vise. Remove pressure tubes. See Fig 1. Mark tie rod ends and rack ends for reassembly reference. Remove tie rod ends, rack boots, clamps, and clips. Using Wrench (09612-24014 ), remove rack ends and claw washers. Remove damper support bracket (if equipped). Remove rack guide spring lock nut, rack guide spring cap, spring, guide, and seat.
    Fig 1: Exploded View Of Rack & Pinion (Typical)
    G93E02341Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Remove rack housing cap. Using Worm Bearing Adjuster (09616-00010 ), remove lock nut, dust cover, and control valve. Remove lower bearing and spacer. Remove snap ring, cylinder end stopper, spacers, and oil seal. Using Bearing Replacer (09612-10061 ), press out rack until end stopper touches press bed. Using brass drift, tap rack and end stopper from housing. Remove spacers and oil seal.