LEMON Manuals: Even more car manuals for everyone

Hydraulic Power Unit: Removal

  1. Disconnect battery negative lead.
  2. Depressurize system.
  3. Disconnect braided hose to accumulator, and power unit multi-plug.
  4. Loosen hose clip and disconnect low pressure suction hose to reservoir, clamp hose to contain fluid and prevent ingress of debris.
  5. Disconnect pressure switch plug.
  6. Disconnect power unit connector.
  7. Working from below unit remove 4 nuts and plain washers.
  8. Remove hydraulic power unit complete with mountings. See Fig 1 .
Fig 1: Removing Hydraulic Power Unit
G00066999Courtesy of LAND ROVER NORTH AMERICA, INC.