Electronic Control Unit (Ecu): Removal
- Remove front and side trim from left hand front seat.
- Adjust seat to its most rearward position and raise seat cushion height to allow access to ECU.
- Disconnect battery negative lead.
- Release ECU plug retaining clip. See Fig 1
.
- Maneuver plug in direction of arrow and detach hooked end of plug from retaining post. See Fig 1
.
- Remove 2 screws securing ECU to mounting bracket.
- Withdraw ECU from retaining clip and remove it from vehicle. See Fig 1
.
Courtesy of LAND ROVER NORTH AMERICA, INC.