LEMON Manuals: Even more car manuals for everyone

Steering Wheel Off Center Inspection

  1. Mark the steering wheel upper (A) and upper cover (B) using the masking tape.
    G15896411Courtesy of KIA MOTORS AMERICA, INC.
  2. Align the steering wheel and mark the straight line (A) on the masking tape.
    G15896412Courtesy of KIA MOTORS AMERICA, INC.
  3. Keep the vehicle straight and drive about 100 m, and mark the new straight line (A) as the steering wheel is turned.
    G15896413Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the front wheel and tires.

    (Refer to Suspension System - " WHEEL  ") 

  5. Loosen the tie rod end nut (A) enough to adjust the steering wheel off center.

    Tie rod tightening torque: 

    49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb.ft)

    G15896414Courtesy of KIA MOTORS AMERICA, INC.
  6. Fix the tie rod end (A) with a spanner to prevent turning during adjustment.
    G15896415Courtesy of KIA MOTORS AMERICA, INC.
  7. Turn the tie rod turnbuckle (A) clockwise or counterclockwise to adjust the steering wheel off center.
    G15896416Courtesy of KIA MOTORS AMERICA, INC.

    [Tie rod turnbuckle rotation according to steering wheel off center] 

    G15896417Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • During adjustment, check the distance (A) from time to time, do not adjust the turnbuckle in the direction of increasing the distance (A).
      G15896418Courtesy of KIA MOTORS AMERICA, INC.
    • Adjust the RH and LH tie rods as below.

      (LH clockwise once → RH counterclockwise once)

  8. Tighten the tie rod end nut (A) after adjustment.

    Tie rod tightening torque: 

    49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb.ft)

    G15896419Courtesy of KIA MOTORS AMERICA, INC.
  9. Install the front wheel and tires.

    (Refer to Suspension System - " WHEEL  ") 

  10. Check the wheel alignment.

    (Refer to Suspension System - " ALIGNMENT  ")