Removal And Installation: Installation
WARNING:
- When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
- When working a high voltage system, the technician must be observed and aware of "General Safety Information and Caution". If not, it may cause serious accidents such as electric shock or short circuit.
- When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
- Install in reverse order of removal.NOTE:
- Install the Vehicle Control Unit (VCU) to the specified torques.
- If the VCU is dropped, it may cause internal damage. Do not use it.
- Perform the Write VIN procedures with the KDS.
(S/W Management - Vehicle Control Unit - Write VIN)