LEMON Manuals: Even more car manuals for everyone

Inspection Procedure

  1. Visually and physically inspect for air and vacuum leaks in the areas listed below
  1. Check the fuel line for following conditions
CAUTION:
  1. Gasoline or gasoline vapors are highly flammable/explosive and an empty fuel tank can still contain explosive vapors. A fire could occur if an ignition source is present. When working on fuel system make sure that the work area has adequate ventilation. Do not smoke. Keep sparks and open flames away at all times.
  2. The fuel system remains under pressure when the engine is not running. Release fuel system pressure before disconnecting any fuel line to reduce the chance of personal injury, or fire damage to vehicle components.
  1. Ignition "OFF". Disconnect fuel pump fuse in Junction Box
  2. Start the engine and wait until it stalls
  3. Ignition "OFF". Connect fuel pump fuse
  4. Install the fuel pressure gauge to the delivery pipe using the fuel pressure gauge adaptor
  5. Activate the fuel pump, check for fuel leaks from the pressure gauge or fuel system
  6. Measure the fuel pressure at idle