LEMON Manuals: Even more car manuals for everyone

Circuit Inspection

G13050988Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Disconnect the electrical connector(s) from the concerned component.
  2. Ignition "ON".
MAP sensor connector 2 (Power) Chassis ground - Approx. 5V
MAP (IAT) sensor connector 3 (IAT Signal) Chassis ground - Approx. 5V
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component and ECM.
MAP sensor connector 3 (IAT Signal) ECM connector 28 (IAT Signal) below 1Ω
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
MAP sensor connector 3 (IAT Signal) Chassis ground - ∞ (Infinite)Ω
MAP sensor connector 4 (Ground) Chassis ground - below 1Ω

Good 

No Good