LEMON Manuals: Even more car manuals for everyone

Removal And Installation

WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the sensor (B) from the Intake manifold by loosening the mounting bolts.

    Manifold absolute pressure sensor mounting bolt: 

    9.8 - 11.8 Nm (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14560820Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
NOTE:
  • Install the Manifold Absolute Pressure Sensor & Intake Air Temperature Sensor (MAPS & IATS) to the specified torque.
  • If the MAPS & IATS is dropped, it may internal damage. (Do not reuse)