LEMON Manuals: Even more car manuals for everyone

Removal And Installation

WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the intake manifold.

    (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

  3. Remove the knock sensor (A) after loosening the mounting bolt.

    Knock sensor mounting bolt: 

    18.6-23.5 Nm (1.9-2.4 kgf.m, 13.7 - 17.4 lb.ft)

    G14560849Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
NOTE:
  • Install the Knock Sensor (KS) to the specified torque.
  • If the KS is dropped, it may internal damage. (Do not reuse)